1700 FEATHERWEIGHT

The 1700 Featherweight is a very nice, small .22 sporter stock with a high roll-over Monte Carlo cheekpiece and a small schnabel forend. It was patterned after the Anschutz® factory Deluxe sporter stock and will only accommodate Anschutz® 1700 series and 64 series actions. Available in right hand only.  Color shown, painted brown.

THE 1700 FEATHERWEIGHT WILL ACCEPT THE FOLLOWING ACTIONS:

(if your action is not listed, please contact us and ask

Anschutz 54, 64, 1700

CZ 452, 453, 455

Remington 541

Suhl 150

 

SPECIFICATIONS

overall length of stock:  30.5"

approx standard fill weight:  2 lbs

depth of action area:  1.725" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.675"

grip width:  1.450

buttstock width:  1.550"

max L.O.P. with 1" recoil pad:  14" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  9/16"

 

Return to the top of the page(Return to Top)


BROWNING CLASSIC

TheBrowning Classic is an Americanized European design with a straight comb and a cheekpiece with a shadow line. The stock has a small amount of cast off as well as cant, which allows the shooter to get behind the scope more easily. The forend will accept up to a #5 barrel contour. Because all of the stocks are filled solid and then inletted using computerized CNC machining centers, each stock is made specifically either for the A-Bolt, the BBR, or the Browning Safari. To guarantee the fit of completely finished stocks, the barreled action must be sent in. Available in right or left hand.  Color shown, painted black.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.660"

grip width:  1.365"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

Return to the top of the page(Return to Top)

 

 

BROWNING HUNTER

The Browning Hunter is a copy of a factory Sako design. It has a Monte Carlo cheekpiece and a palm swell. It also has a small amount of cast off and cant, which makes for easier target acquisition. The forend of this stock is very narrow and will take up to a #4 barrel contour. Because all of the stocks are filled solid and then inletted using computerized CNC machining centers, each stock is made specifically either for the A-Bolt, the BBR, or the Browning Safari. To guarantee the fit of completely finished stocks, the barreled action must be sent in. Available in right or left hand.  Color shown, painted black.

Return to the top of the page(Return to Top)

 

 

BROWNING VARMINT

This stock has a semi-beavertail forend. It has a Monte Carlo comb, but no cheekpiece, allowing it to be shot right or left-handed. This stock is one of the more popular stocks in the McMillan line and will accept up to #8 barrel contour. Available in right and left hand.  Color shown, 70% turquoise 30% white marble.

Return to the top of the page(Return to Top)

 

 

CZ 550

This stock is specifically designed to fit the CZ 550 actions. The buttstock has a straight comb and cheekpiece, and the fairly narrow forend will take custom barrels up to a #5 contour. This stock has fine checkering and is available in right hand only. For CZ Magnum actions, see the CZ Express stock on this page.  Color shown, desert camo.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.660"

grip width:  1.365"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

Return to the top of the page(Return to Top)

 

 

CZ EXPRESS

This is an English safari style stock designed specifically for the CZ 550 Magnum action. It will work with many other large caliber actions with drop belly floorplates such as the Brno 602, the Olympic Arms BBK-01 and the 02 actions. The medium-width forend will accept custom barrel contours up to a Douglas #5 but will not take heavy straight taper target type contours. Right hand only.  Color shown, painted black.

Return to the top of the page(Return to Top)

 

 

CZ M40A22 NEW

This is a variation of McMillan's popular M40A1 and HTG stock modified specifically for the CZ 452-453-455 line of rifles. It has textured grip panels on the pistol grip and forearm. This is an excellent field varmint stock or for a .22 rimfire "training rifle" for a M40A1 or HTG stock on a centerfire rifle. This stock is exactly the same in all dimensions as the HTG except that the depth of the action area has been reduced to fit the shallower .22 rimfire actions.  Color shown, forest camo.

Return to the top of the page(Return to Top)

 

 

LAZZERONI SPORTER

This stock was designed by the famous Harry Lawson and was specifically made for heavy recoil rifles. The forend is checkered and slightly flared to accommodate the larger barrel (up to a #7) contour of the large caliber rifles. It has a high, roll-over Monte Carlo style cheekpiece, a small palm swell and checkered pistol grip, as well as a small amount of cast off. All features combine to lessen felt recoil. Available in right and left hand models for Remington style actions only. Color shown, molded in black.

Return to the top of the page(Return to Top)

 

 

LAZZERONI THUMBHOLE SPORTER

Like the Lazzeroni Sporter, the Thumbhole was designed by Harry Lawson for heavy recoil rifles. The checkered forend is slightly flared and will accept up to a #7 barrel contour. The pistol grip is checkered and slightly less vertical with a small palm swell and right hand tilt. It has a roll-over cheekpiece with a small Monte Carlo and a small amount of cast off. Available in right hand only. Will accept a variety of actions, including Remington, Winchester, Sako, Savage, McMillan and others.  Color shown, 50% orange 25% gray 25% black marble.

Return to the top of the page(Return to Top)

 

 

MAUSER INTERARMS MARK X

This classic style stock has a straight comb and a small cheekpiece with some cast-off. The forend will accept custom barrels up to a #5 contour. It has crisp checkering appropriate for a classic stock. We offer completely finished "custom-drop-in" stocks for the Interarms Mark X action only. We do have inletting programs for most of the FN and 98 variations, but because of the many styles of bottom metal, custom bolt handles, barrels and safeties, we do not offer pre-finished drop-in stocks for them. We only offer 95% inletted blanks for gunsmiths to finish fitting, finishing and bedding. Available in right or left hand. Color shown, desert camo.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.660"

grip width:  1.365"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

Return to the top of the page(Return to Top)

 

 

GAME SCOUT NEW

The new Game Scout design is a duplicate of the Remington Classic stock but with the popular A-3 vertical pistol grip. This gives McMillan A-series stock owners a smooth transition from their tactical stock to a compact hunting stock. It is an ambidextrous stock and can be inletted for most right hand and left hand Remington, Winchester, Tikka, Sako and Savage blind mag type actions.  It will take barrel contours up to about a #5 Douglas or Remington Varmint size.  It has texture panels on the forearm and grip.  Color shown, safari camo.

 

The Game Scout is now available with a adjustable clampbar or thumbwheel c/p option for remington style actions only! 

 

THE GAME SCOUT WILL ACCEPT THE FOLLOWING ACTIONS:

(if your action is not listed, please contact us and ask

Borden Timberline & Alpine

Defiance - rem tang models

McMillan G30

Nesika - rem tang models

Sako - most models, cannot do the 75 series

Savage - single shot & blind mags only

Remington - 600,660, 700, model 7, 721, 722, 788, XP 100

Stiller - Predator & Tactical

Surgeon - all models

Tikka - 55, 65, T3, 595, 695

 

SPECIFICATIONS

overall length of stock:  31"

approx standard fill weight:  2 lbs

depth of action area:  1.775" (this will vary depending on action model)

max diameter action:  1.36"

forearm width:  1.885"

grip width:  1.800"

buttstock width:  1.585"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  9/16"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

A-3™ SPORTER NEW

The A-3 Sporter design is based on customer demand. For years, shooters have purchased McMillan's "A" series tactical stocks as precision rifles. Because McMillan's "A" series are basically designed as prone stocks, the company received numerous requests for a version of the tactical stocks that retained its comfortable vertical pistol grip but was more suited to general hunting and offhand use. The A-3 Sporter is a variation of McMillan's A-3 tactical stock but with the drop-at-heel lowered from 3/8" down to 1" for better stock position on the shoulder for offhand and sitting use. The forearm has been curved in at the top to a "semi-beavertail" type for a more positive grip when hand holding the rifle. The pistol grip is the same as the A-3 and Adj. A3-5 stocks.

It is an ambidextrous stock and can be inletted for most Remington, Winchester, Sako, Tikka and Savage type actions. It can be inlet for most types of bottom metal and the forearm can be inletted for sporting barrel contours up to a Remington Varmint or #5 Douglas type contour. It is an excellent stock for general hunting and field varmint use with the famous "A" series type pistol grip.  Color shown, Mcwoody (34% brown 33% black 33% light brown marble).

 

SPECIFICATIONS

overall length of stock:  30 1/2 "

approx standard fill weight:  2.25 lbs

depth of action area:  1.850" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  2.265"

grip width:  1.850"

buttstock width:  1.725"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/16"

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

MCMILLAN THUMBHOLE NEW

This is a new stock design for Remington 700 type and Savage blind magazine type actions. It has a more conventional and vertical pistol grip than our Lazzeroni Thumbhole and a slightly lower comb at the front. The medium width forearm can be inletted for sporting contours up to a Remington Varmint and #5 Douglas type contour. Available in right hand only.  Color camo, woodland camo.

 

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2 - 2.25lbs

depth of action area:  1.940" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.750"

grip width:  1.420"

buttstock width:  1.780"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 9/16 " / rear 1/2 "

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

MCMILLAN HUNTER NEW

This stock is a variation of our popular Sako Hunter stock design and is modified to fit most Remington 700 type and Savage blind magazine type actions. It has the sculptured Sako type pistol grip with palm swell and a Monte Carlo type butt with some cast-off. The medium narrow forearm can be inletted for barrel contours up to about a #4 Douglas size with finished shanks of 1.5" or less. Available in true right hand and left hand versions.  Color shown, 50% olive 25% tan 25% black marble.

SPECIFICATIONS

overall length of stock:  31.25"

approx standard fill weight:  2 lbs

depth of action area:  1.950" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.550"

grip width:  1.725"

buttstock width:  1.540"

max L.O.P. with 1" recoil pad:  14.25" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 11/16 " / rear 3/8"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

REMINGTON VARMINT

We have refined our Remington Varmint stock in response to your requests for a higher comb that accommodates the large bell varmint scopes. In addition to the higher comb, the stock includes conventional checkering, a palm swell on the pistol grip, and a semi-beavertail forearm about 2" wide. It is an ambidextrous stock that may be inletted for any right or left hand Remington action. It will take barrels up to a #7 Douglas contour.  Color shown, painted olive.

SPECIFICATIONS

overall length of stock:  30"

approx standard fill weight:  2-2.25 lbs

depth of action area:  1.825" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  2.1"

grip width:  1.7"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  13.75" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  1/2"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 


Adjustable HTG
Available with adjustable integral cheekpiece.

HTG (GENERAL PURPOSE HUNTING)

The General Purpose Hunting (HTG) is the original M40A1 Marine Sniper Rifle stock as originally designed by McMillan for a heavy barrel Remington 700. It can be used for either short or long actions, as well as ADL (blind magazine), BDL (hinged floorplate), and most detachable box magazine systems. It will take any barrel contour up to a #8.  It is an ambidextous stock. 

We now have versions that can be inlet for most Remington, Winchester, Sako, Tikka and Savage rifles.  We also have an integral adjustable cheekpiece version for most of these actions.  All of these versions have texture on forend and pistol grip. Only the original M40A1 stock for Remingtons can be ordered without texture.  Color shown, forest camo.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2-2.25 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.850"

grip width:  1.6"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.25" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

REMINGTON BDL

The Remington BDL was patterned after a Remington Custom Shop .375 stock. The forend is slightly larger than the factory stock and can accommodate up to a #5 barrel contour for right hand configurations. The left hand version is slimmer and will accommodate up to a #4 barrel contour. It may be used with long or short 700 actions, ADL (blind magazine) or BDL (hinged floorplate) and as a single shot using a Remington ADL trigger guard. It can also be used for 721, 722, and 788 actions.  Color shown, desert camo.

 

SPECIFICATIONS

overall length of stock:  30.5 "

approx standard fill weight:  2-2.25 lbs

depth of action area:  1.775" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.85"

grip width:  1.625"

buttstock width:  1.565"

max L.O.P. with 1" recoil pad:  14.25" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  .850"

 

 

REMINGTON MOUNTAIN RIFLE

The finely designed Remington Mountain Rifle is a classic stock with a cheekpiece that can be used as a replacement for any factory mountain rifle. It is also ideal if you plan to convert a standard ADL or BDL rifle to the slimmer lines of a mountain rifle. It will accept any factory barrel contour up to the magnum or a #3 custom barrel. Available in right hand only.  Color shown, painted black.

SPECIFICATIONS

overall length of stock:  31 1/8 "

approx standard fill weight:  2 lbs

depth of action area:  1.9" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.625"

grip width:  1.380"

buttstock width:  1.565"

max L.O.P. with 1" recoil pad:  14.75" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 9/16 " / rear 3/8"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

REMINGTON HUNTER

The Remington Hunter is a beautifully designed stock with a Monte Carlo cheekpiece as well as a small palm swell. The uniquely designed fine line checkering adds to the "custom" look of this stock. This stock is patterned after the factory Sako 75 varmint and has been adapted specifically for Remington 700 actions. It has a wide forend that will accept up to a #8 barrel contour. Available in right and left hand.  Color shown, 50% olive 25% woodland beige 25% black marble.

SPECIFICATIONS

overall length of stock:  31 5/8 "

approx standard fill weight:  2.25 - 2.5lbs

depth of action area:  1.875" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.975"

grip width:  1.670"

buttstock width:  1.820"

max L.O.P. with 1" recoil pad:  15" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 3/4" / rear 5/8"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

REMINGTON CLASSIC

The Remington Classic is an exact factory duplicate. It can be used with both the long and short 700, 721, 722, 788 and 40X actions. This stock is available for ADL (blind magazine) or BDL (hinged floorplate) and as a single shot using an ADL trigger guard. It will accommodate up to and including a #5 barrel contour. Available in right and left hand.  Color shown, painted black.

THE REMINGTON CLASSIC WILL ACCEPT THE FOLLOWING ACTIONS:

(if your action is not listed, please contact us and ask

Borden Timberline & Alpine

Defiance - rem tang models

McMillan G30

Nesika - rem tang models

Savage - single shot & blind mags only

Remington - 600,660, 700, model 7, 721, 722, 788, XP 100

Stiller - Predator & Tactical

Surgeon - all models

SPECIFICATIONS

overall length of stock:  31"

approx standard fill weight:  2 lbs

depth of action area:  1.775" (this will vary depending on action model)

max diameter action:  1.36"

forearm width:  1.720"

grip width:  1.450"

buttstock width:  1.585"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  11/16"

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

REMINGTON SPORTER

The Remington Sporter is a fine, classic style hunting rifle stock with a traditional design that includes a shadow-line cheekpiece, straight comb, and borderless checkering on the forend and pistol grip. The forend is large enough to take a #5 barrel contour. Available in right and left hand.  Color shown, mcwoody. 

 

SPECIFICATIONS

overall length of stock:  30.5"

approx standard fill weight:  2 lbs

depth of action area:  1.925" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.9"

grip width:  1.450"

buttstock width:  1.690"

max L.O.P. with 1" recoil pad:  13.75" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 1/2" / rear 5/16"

 

 

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

REMINGTON MODEL 7

The Remington Model 7 is an exact copy of the factory original stock. It is a classic style stock without a cheekpiece and has a schnabel forend. This stock is designed for the Model 7 but can be used with most Remington actions. The Model 7 will take up to a #3 barrel contour. Available in right and left hand.  Color shown, desert camo.

SPECIFICATIONS

overall length of stock:  28.25"

approx standard fill weight:  2 lbs

depth of action area:  1.9" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.650"

grip width:  1.370"

buttstock width:  1.675"

max L.O.P. with 1" recoil pad:  13.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 1/2" / rear 7/8 "

Return to the top of the page(Return to Top)

Our Stocks Fit These Remington ActionsOur Stocks Fit These Remington Actions

 

 

XP-100

This is an adaptation of the original plastic factory stock found on the XP-100. The forend has been widened to accept heavy competition barrels and includes an integral trigger guard in the design. These stocks do not come as "drop-in" ready.  They require minor gunsmithing and bedding.  This is an ambidextrous stock.  Color shown, painted gray.

 

Return to the top of the page(Return to Top)

 

 

RUGER R

The Ruger R is a copy of the standard factory issued stock. It is a classic stock without a cheekpiece and can be shot right or left-handed. It can be inletted for any standard Ruger Model 77 action with tang safety, either short or long, and will accept any barrel contour offered by the factory, as well as custom barrels up to and including a #5 Douglas. The Ruger R will not accept MK II actions.  Color shown, painted black.

 

Return to the top of the page(Return to Top)

 

 

MARK II CLASSIC

*** NOW AVAILABLE FOR THE RUGER GUNSITE SCOUT RIFLE  ***

The Mark II classic and  Mark II hunter (see below) will fit the Ruger GSR perfectly.

 

It will fit into other stocks we offer for mk II's as well but the bottom metal will sit under flush of the belly of the stock by about 1/8", purely cosmetic, otherwise magazine and function of the rifle are fine.


The Mark II Classic is an American European design with a straight comb and a cheekpiece with a shadow line. The stock has a small amount of cast off as well as cant, which allows the shooter to get behind the scope more easily. It will take up to a #5 Douglas barrel contour. Available in right and left hand. For MK II actions only.  Color shown, painted black.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.660"

grip width:  1.365"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

Return to the top of the page(Return to Top)

 

 

MARK II HUNTER

***  NOW AVAILABLE FOR THE RUGER GUNSITE SCOUT RIFLE  ***


The Ruger Mark II Hunter has a Monte Carlo cheekpiece and a palm swell. It also has a small amount of cast off and cant, which makes for easier target acquisition. The forend of this stock is very narrow and will take up to a #4 Douglas barrel contour with a short barrel cylinder. The stock is available in right and left hand. For MK II actions only.  Color shown, painted black.

Return to the top of the page(Return to Top)

 

 

MARK II VARMINT

The Ruger Mark II Varmint, with its semi-beavertailed forend, is made for use with most Ruger actions. This stock has a Monte Carlo comb, but no cheekpiece, allowing it to be shot right or left-handed. This stock is one of the more popular stock in the McMillan line. It will accept up to a #8 Douglas contour. Available in right and left hand.  Color shown, 70% turquoise 30% white marble.

Return to the top of the page(Return to Top)

 

 

10/22 SPORTER

The 10/22 Sporter is a standard style hunting stock with a Monte Carlo comb and no cheekpiece. It is similar to the factory Deluxe Sporter and will take barrels up to 1 inch in diameter. This is an ambidextrous stock and may be used both right and left handed.  Color shown, painted black.

Return to the top of the page(Return to Top)

 

McMillan Stocks for Sako - Tikka - Howa

Sako rifles are easily the most popular of the European rifles. In addition, Sako has produced some of the most aesthetically pleasing stock designs available. The Hunter, Classic, and the Varmint designs can be made for nearly all Sako actions. Since Sako often changes its actions, it is imperative that we have complete information to ensure your satisfaction. Call for details.

Fitting Your Sako Action.

Since Sako often changes its actions, we must know the model number to ensure your satisfaction.

Our Sako Hunter, Sako Classic, Sako Varmint and Sako Thumbhole stock designs can be inletted for most of the older Sako actions from the L461-L579-L61R series thru the AI, AII, AV series, the A7 and the 491-591-691 series. We have reduced size versions for the little L461 and AI actions. The older L46 and L57 actions will not fit our stock designs and we do not offer stocks for them. We can also inlet our Sako stocks for the Tikka 595-695, 55, 65, T3 and Howa/Vanguard series of rifles.

The newer Sako 75 series require their own stock designs and these stocks are so indicated.

The newest Sako 85 series also requires their own designs and we have versions of the Sako Hunter and Sako Classic stocks for this series.

Please call or email for details.

 

SAKO 75 HUNTER

The Sako 75 Hunter is a reproduction of the factory stock, which may be one of the finest hunting stocks on the market today. It comes with a Monte Carlo and cheekpiece, small palm swell and uniquely designed fine line checkering. It can accommodate all factory Sako 75 actions with up to a #5 barrel contour. It is available in right and left hand.  Color shown, painted black.

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO 75 VARMINT

The Sako 75 Varmint features a Monte Carlo cheekpiece, small palm swell and fine lined checkering. The semi-beavertail forend is wide enough to be stable when shooting off sandbags or pedestals, but not as wide as a benchrest stock. This stock is available for Sako 75-I and 75-III actions only and will accept up to a #8 Douglas barrel contour. It is available in right hand only.  Color shown, 70% black 30% gray marble.

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO 75 SAFARI

The Sako 75 Safari is a straight comb English express style stock specifically for the Sako 75-IV and 75-V actions. It has a nice sculptured cheekpiece and some cast off. The medium forend will accept barrel contours up to a #5A Douglas or smaller. Available in right hand only.  Color shown, painted olive.

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO HUNTER

The Sako Hunter is a copy of the factory original hunter design stock. It has a Monte Carlo cheekpiece, as well as a palm swell.It also has a small amount of cast off and cant, which makes for easier target acquisition. The forend of this stock is very narrow and will take up to a #4 Douglas barrel contour with a short barrel cylinder. This is a hunter style stock to fit most Sako actions in both right and left hand.  Color shown, painted black.

SPECIFICATIONS

overall length of stock:  31"

approx standard fill weight:  2 lbs

depth of action area:  1.775" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.575"

grip width:  1.635"

buttstock width:  1.550"

max L.O.P. with 1" recoil pad:  14.25" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  front 1/2" / rear 5/16"

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO CLASSIC

The Sako Classic is an Americanized European design with a straight comb and a cheekpiece with a shadow line. The stock has a small amount of cast off as well as cant, which allows the shooter to get behind the scope more easily. The Sako Classic can be used for most Sako actions and will accept up to a #5 Douglas contour. Available in right and left hand.  Color shown, painted black.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.660"

grip width:  1.365"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.5" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO VARMINT

The Sako Varmint, with its semi-beavertail forend, is made for use with most Sako actions as well as the PPC barreled action. This stock has a Monte Carlo comb but no cheek-piece, allowing it to be shot right or left-handed. This stock is one of the more popular stocks in the McMillan line. It will accept up to a #8 Douglas contour and is available in right and left hand.  Color shown, 70% turquoise 30% white marble.

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO TRG-S -THIS STOCK HAS BEEN DISCONTINUED.

Based on the popular Sako Hunter design, this stock is specifically designed for the Sako TRG-S rifle. The slender forearm will accept custom barrels up to a #4 Douglas contour. It is available in right hand only. This stock must have our custom steel trigger guard/floorplate assembly and requires the assembly of some parts from your factory stock.

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

SAKO THUMBHOLE

This new thumbhole stock design is for older Sako rifles in the 491-591-691 series and earlier versions as well as for most Tikka and Howa actions. The Sako Thumbhole is a variation of our new McMillan Thumbhole stock. The forearm can be inletted for barrel contours up to the factory varmint contours and the #5 Douglas type contours. Available in right hand only.  Color shown, woodland camo.

 

Return to the top of the page(Return to Top)

McMillan Stocks for SakoInformation for Sako/Tikka/Howa Stocks

 

 

GAME SCOUT NEW

The new Game Scout design is a duplicate of the Savage Classic stock but with the popular A-3 vertical pistol grip. This gives McMillan A-series stock owners a smooth transition from their tactical stock to a compact hunting stock. It is an ambidextrous stock and can be inletted for most right hand and left hand Savage type actions and for barrel contours up to about a #5 Douglas or Remington Varmint size. Will fit most older Savages and blind magazine actions.  Color shown, safari camo.

Return to the top of the page(Return to Top)

 

 

A-3™ SPORTER NEW

The A-3 Sporter design is based on customer demand. For years, shooters have purchased McMillan's "A" series tactical stocks as precision rifles. Because McMillan's "A" series are basically designed as prone stocks, the company received numerous requests for a version of the tactical stocks that retained its comfortable vertical pistol grip but was more suited to general hunting and offhand use. The A-3 Sporter is a variation of McMillan's A-3 tactical stock but with the drop-at-heel lowered from 3/8" down to 1" for better stock position on the shoulder for offhand and sitting use. The forearm has been curved in at the top to a "semi-beavertail" type for a more positive grip when hand holding the rifle. The pistol grip is the same as the A-3 and Adj. A3-5 stocks. It is an ambidextrous stock and can be inletted for most Remington 700 and Savage type actions. The forearm can be inletted for sporting barrel contours up to a Savage Varmint or #5 Douglas type contour. It is an excellent stock for general hunting and field varmint use with the famous "A" series type pistol grip. Will fit most older Savages and blind magazine actions.  Color shown, mcwoody.

Return to the top of the page(Return to Top)

 

 

MCMILLAN THUMBHOLE NEW

This is a new stock design for Savage blind magazine type actions. It has a more conventional and vertical pistol grip than our Lazzeroni Thumbhole and a slightly lower comb at the front. The medium width forearm can be inletted for sporting contours up to a Savage Varmint and #5 Douglas type contour. Available in right hand only. Will fit most older Savages and blind magazine actions.  Color shown, woodland camo.

Return to the top of the page(Return to Top)

 

 

MCMILLAN HUNTER NEW

This stock is a variation of our popular Sako Hunter stock design and is modified to fit most most older Savages and blind magazine actions. It has the sculptured Sako type pistol grip with palm swell and a Monte Carlo type butt with some cast-off. The medium narrow forearm can be inletted for barrel contours up to about a #4 Douglas size with finished shanks of 1.5" or less. Available in true right hand and left hand versions.  Color shown, 50% olive 25% tan 25% black marble.

Return to the top of the page(Return to Top)

 

 

SAVAGE VARMINT

We have refined our Savage Varmint stock in response to your requests for a higher comb that accommodates the large bell varmint scopes. In addition to the higher comb, the stock includes conventional checkering, a palm swell on the pistol grip, and a semi-beavertail forearm about 2" wide. It is an ambidextrous stock that may be inletted for any right or left hand Savage action. It will take barrels up to a #7 Douglas contour. Will fit most older Savages and blind magazine actions.  Color shown, painted olive.

SPECIFICATIONS

overall length of stock:  30"

approx standard fill weight:  2-2.25 lbs

depth of action area:  1.825" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  2.1"

grip width:  1.7"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  13.75" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  1/2"

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 


Adjustable HTG
Available with adjustable integral cheekpiece.

SAVAGE HTG (GENERAL PURPOSE HUNTING)

The Savage General Purpose Hunting (HTG) is the original M40A1 Marine Sniper Rifle stock as originally designed by McMillan for a heavy barrel Remington 700. It can be used for either short or long actions, as well as ADL (blind magazine), BDL (hinged floorplate), and most detachable box magazine systems. It will take any barrel contour up to a #8. This stock will fit most older Savage and blind magazine actions. The HTG is available with or without texture on forend and pistol grip. Available in right and left hand.  Color shown, forest camo.

SPECIFICATIONS

overall length of stock:  31.5"

approx standard fill weight:  2-2.25 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.4"

forearm width:  1.850"

grip width:  1.6"

buttstock width:  1.7"

max L.O.P. with 1" recoil pad:  14.25" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  5/8"

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAVAGE BDL

The Savage BDL was patterned after a Remington Custom Shop .375 stock. The forend is slightly larger than the factory stock and can accommodate up to a #5 barrel contour for right hand configurations. The left hand version is slimmer and will accommodate up to a #4 barrel contour. It may be used with long or short 700 actions, ADL (blind magazine) or BDL (hinged floorplate) and as a single shot using a Remington ADL trigger guard. It can also be used for 721, 722, and 788 actions. Will fit most older Savages and blind magazine actions. Color shown, desert camo.

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAVAGE MOUNTAIN RIFLE

The finely designed Savage Mountain Rifle is a classic stock with a cheekpiece that can be used as a replacement for any factory mountain rifle. It is also ideal if you plan to convert a standard ADL or BDL rifle to the slimmer lines of a mountain rifle. It will accept any factory barrel contour up to the magnum or a #3 custom barrel. Available in right hand only. Will fit most older Savages and blind magazine actions.  Color shown, painted black.

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAVAGE HUNTER

The Savage Hunter is a beautifully designed stock with a Monte Carlo cheekpiece as well as a small palm swell. The uniquely designed fine line checkering adds to the "custom" look of this stock. This stock is patterned after the factory Sako 75 varmint and has been adapted specifically for Savage actions. It has a wide forend that will accept up to a #8 barrel contour. Available in right and left hand. Will fit most older Savages and blind magazine actions.  Color shown, 50% olive 25% woodland beige 25% black marble.

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAVAGE CLASSIC

The Savage Classic is an exact factory duplicate. It can be used with both the long and short 700, 721, 722, 788 and 40X actions. This stock is available for ADL (blind magazine) or BDL (hinged floorplate) and as a single shot using an ADL trigger guard. It will accommodate up to and including a #5 barrel contour. Available in right and left hand. Will fit most older Savages and blind magazine actions.  Color shown, painted black.

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAVAGE SPORTER

The Savage Sporter is a fine, classic style hunting rifle stock with a traditional design that includes a shadow-line cheekpiece, straight comb, and borderless checkering on the forend and pistol grip. The forend is large enough to take a #5 barrel contour. Available in right and left hand. Will fit most older Savages and blind magazine actions.  Color shown, mcwoody.

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAVAGE MODEL 7

The Savage Model 7 is an exact copy of the factory original stock. It is a classic style stock without a cheekpiece and has a schnabel forend. This stock is designed for the Model 7 but can be used with most older Savages and blind magazine actions. The Model 7 will take up to a #3 barrel contour. Available in right and left hand.  Color shown, desert camo.

 

Return to the top of the page(Return to Top)

Fitting Your Savage ActionFitting Your Savage Action

 

 

SAUER

The Sauer stock is a European style stock with Monte Carlo cheekpiece and a small palm swell. It is available for the Colt Sauer, Sauer 80, and the Sauer 90. Because of the difficulty in fitting the clip properly, it is imperative that we have the barreled action to ensure proper function and fit. Available in right hand only.  Color shown, painted black.

Return to the top of the page(Return to Top)

 

 

WEATHERBY MARK V

The Mark V is a typical Weatherby stock with Monte Carlo cheekpiece and skip line checkering. The forend is somewhat larger than the standard Mark V stocks to accommodate all calibers including the .378 and .460 Weatherby magnums. Available in right and left hand.  Color shown, painted black.

Return to the top of the page(Return to Top)

 

 

WEATHERBY EXPRESS

The Weatherby Express is similar to the Sako 75 Safari. This English express style stock has a straight comb, a sculptured cheekpiece and some cast-off. It is designed specifically for the full size Weatherby Mark V action and the forearm will accept all factory barrels and custom barrelsup to a #5A Douglas. Available in right hand only.  Color shown, painted olive.

SPECIFICATIONS

overall length of stock:  29.25"

approx standard fill weight:  2 lbs

depth of action area:  1.8" (this will vary depending on action model)

max diameter action:  1.45"

forearm width:  1.660"

grip width:  1.4"

buttstock width:  1.740"

max L.O.P. with 1" recoil pad:  14.75" (1/2" spacer can be added to lengthen LOP)

drop @ comb:  11/16"

 

Return to the top of the page(Return to Top)

 

 

WINCHESTER HUNTER NEW

This stock is a variation of our popular Sako Hunter stock but is modified for use with most Winchester type and Montana type actions. It has the sculptured Sako Hunter type pistol grip with palm swell and a Monte Carlo type buttstock with some cast-off. The medium narrow forearm can be inletted for sporting barrel contours up to about a #4 Douglas type with a shank length of 1.5" or less. It is available in right hand only.  Color shown, painted gray.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

MODEL 70 HUNTING

The Model 70 Hunting stock duplicates the factory standard Model 70 stock with a Monte Carlo cheekpiece. It can be used for any late Model 70 as well as any Pre-64 Model 70. It will accept up to a #5 barrel contour and may come as a blind magazine for the Ranger Series Model 70's, as well as with a standard hinged floorplate. Available in right hand only.  Color shown, 50% green 25% black 25% light green marble.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER SUPERGRADE

The Winchester Supergrade is an exact copy of the factory Supergrade, which has a classic straight comb with cheekpiece and fine checkering.Its medium-width forend will accept up to and including a #5 barrel contour, which makes this an excellent choice for large caliber rifles. Available for all Winchester Model 70 actions in right and left hand.  Color shown, 60% green 40% tan marble.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER EXPRESS NEW

This stock is a variation of our popular Winchester Safari stock but with the depth of the action area reduced to work with standard factory floor plates and magazine capacities. It is designed to fit most of the Winchester type and Montana type actions. The checkering has been replaced with textured panels on the forearm and pistol grip for a more positive gripping surface in the field. The forearm can be inletted for barrels up to about a #5 Douglas type but will not accept the straight taper target barrels. Available in right hand only.  Color shown, painted brown.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER SAFARI

The Winchester Safari is an English safari style stock designed specifically for the Model 70 long action with a Sunny Hill drop belly floorplate. It has a straight comb with a cheekpiece and some cast off. The medium size forearm will take up to a #5A Douglas barrel. Available in right hand only.  Color shown, painted black.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER FEATHERWEIGHT

The Winchester Featherweight was the stock used by USRAC on the Winlite Featherweight rifles. This stock has a straight comb and no cheekpiece, thin pistol grip and thin schnabel forend. It can be used for either long or short actions as well as featherweight or sporter barrel contours. This stock has nice checkering and will accept up to a #3 contour. Available in right and left hand.  Color shown, painted dark earth.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER CLASSIC

The Winchester Classic is the stock used for the Winchester Winlite rifle. This stock has a classic comb, no cheekpiece, and is easy to handle. It is available for short or long Model 70 actions as well as featherweight or standard sporter barrel contours. It will accept up to a #5 contour. The stock has no checkering. Available in right and left hand.  Color shown, painted black.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER PRE-64 MONTE CARLO

The Pre-64 Monte Carlo is a factory duplicate stock. It has a raised comb suitable for use with a scope. This stock can be used for any Pre-64 or late Model 70 barreled action and will accept up to a #4 barrel contour.  Color shown, mcwoody.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER VARMINT

Based on our very popular Remington varmint stock, this design was produced in response to multiple requests for a Winchester varmint stock. It is ambidextrous and may be inletted for any right or left hand Winchester or Montana action. It has a small palm swell pistol grip and a semi-beavertail forearm about 2" wide. The Winchester Varmint will take barrels up to a #7 Douglas contour.  Color shown, 50% orange 25% gray 25% black marble.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

WINCHESTER MARKSMAN

The Winchester Marksman is a largestock primarily designed for bigbore competition. The Winchester Marksman makes a very good varmint stock. This classic stock doesn't have a cheekpiece, which allows it to be shot either right or left-handed. It will accept all Model 70 actions, as well as Remington 700, 721, 722, 788 or 40X. It is available as a blind magazine, a hinged floorplate, or as a single shot using an ADL trigger guard. It is available with texture on the pistol grip and forend. It will accept up to a #8 contour.  Color shown, 50% red 25% white 25% black marble.

Return to the top of the page(Return to Top)

Identifying Your Winchester RifleIdentifying Your Winchester Rifle

McCLASSIC

The McClassic is a classic stock without a cheekpiece, and was designed specifically to fit the square tang type actions. It works extremely well with the Shilen DGA, Stolle Kodiak, Nesika Bay, BAT and Hall custom actions. It will accommodate up to and including a #5 barrel contour. This stock will not work properly with Remington 700, Winchester 70 or Sako actions. Available in right and left hand.  Color shown, painted gray.

Return to the top of the page(Return to Top)

How We Build the World's Perfect Rifle StockHow We Build the World's Perfect Rifle Stock

NESIKA BAY VARMINT

We redesigned the family of varmint stocks that includes the Remington Varmint for Remington 700 actions and the Nesika Bay Varmint for the Nesika Bay, BAT, Kodiak, and other actions with benchrest type rear tangs. We added a slightly raised Monte Carlo comb for a better cheek weld with bigger scopes, and added checkering panels to the forend and pistol grip for better non-slip handling. These stocks are ambidextrous and may be inletted for either right or left hand actions. The forend will take barrels up to 1.25" in diameter.  Color shown, painted olive. 

Return to the top of the page(Return to Top)

How We Build the World's Perfect Rifle StockHow We Build the World's Perfect Rifle Stock

RIMFIRE MAGNUM VARMINT
This stock is designed for the various rimfire rifles being used for field varmint hunting. It has a 2" wide semi-beavertail forearm, a raised comb for scope use, and a slight palm swell on the pistol grip. It is an ambidextrous stock and may be used both right and left handed. It can be inletted for the Anschutz® 1700 series, the Savage Model 93 and MK II actions, the CZ452 series, the Ruger 77/22 series, and several other popular rimfire and rimfire magnum rifles.  Color shown, painted olive.

Return to the top of the page(Return to Top)

How We Build the World's Perfect Rifle StockHow We Build the World's Perfect Rifle Stock